below bridges, under trees, between high buildings, or with certain weather conditions. Side effect: As a result of filtering by accuracy, points may be entirely missing for e.g. Accuracy is the proximity of measurements to the true position, and is not directly related to precision, which is the scatter of repeated measurements. This filter allows you to record only points measured with a minimum \"accuracy\" indication (in meters/feet, as reported by Android for your chipset). Recommendation: Set 5 meters displacement if you don't want to record minor details of your route and you don't need additional data about your rest period. NOTE: Your file will contain less information for post-processing, and at the same time can potentially save GPS artifacts caused by bad reception or chipset effects. Minor movements (e.g., to the side of the road to mark a possible turn in your path) may also be filtered out. Side effects: Rest periods are not recorded at all or are recorded by one point. It also improves the appearance of the tracks on the map without additional processing. This filter allows you to avoid additional data recording when there is little or no movement detected. Options from 0 seconds to 5 minutes are available. This is the frequency of location requests after which location points are recorded in the track. Note: Trip recording uses the battery energy and continues to run in the background when the screen is closed. If enabled, the track is automatically recorded during navigation and auto-saved in Menu → Trip recording tab. If disabled, the recording starts automatically. If enabled, you can select the necessary settings before you start recording, and then click Start. First, you need to select the required profile, and then among other profile settings find the section dedicated to Trip recording. All profiles are configured in the global settings of the entire app. To make the final result look smooth and usable, you may need to make some adjustments to the way you capture and record location points to the file: few, a lot, with gaps, etc. The Trip recording plugin is configured for each profile separately, as parameters may vary depending on the nature of your movement ( for example, driving a car, cycling, Nordic walking activities). In navigation, the difference may exist due to the drift caused by the air, water, skidding, slipping, etc. The heading direction is calculated in degrees and determined with the angle between the direction the front panel is pointing and the course towards which the vehicle/device is intended to move. Heading is the direction to where the front panel of the vehicle/device is pointing. Speed is the rate, in meters per second, at which the user is detected to be moving. from Horizontal Dilution of Precision, determined as the error caused by the relative position of the GPS satellites. HDOP is one of the terms of GPS accuracy, horizontal accuracy, calculated in meters, abbrev. Timestamp is the date and time of when the point was recorded. Longitude is one of the geographical coordinates to identify the location with.Įlevation is the hight of the point above the sea, calculated in meters. Latitude is one of the geographical coordinates to identify the location with. Segment groups points between gaps detected as absence of any movement within one recording. Every point is provided with the latitude and the longitude as base attributes of the detected location. Point shows the detected geographical location of the user.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |